NTS&B Phase 5 module Track Wiring Laid In

Finally got all of the track wiring laid in from the barrier blocks for the outer 3 loops.  Only about 4 of the pairs are connected to the tracks at this time.   There will multiple connections on each loop.  On the sidings, there is usually a connection on each end.  This is to provide insurance that a week pin will not cause power problems in the future.  Here are pictures of the block connectors, which will give you an idea on how many wires I have run so far.  The loose unlabeled wires are temporary connections. All black wires are to the center rail of the tracks, and the green wires are to the outer (ground) wires.  Control Switch and Accessory wiring have not been started.

Connectors on right are outside track (1), ones on left are loop 2

 Track 3 Connector

Common Debug Power Connector